EasyManua.ls Logo

Vax VX32SK - Getting Started; Charging the Battery

Vax VX32SK
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Getting started
PLEASE READ ‘LET’S TALK SAFETY’ BEFORE USE
CAUTION: The battery used in this device may present a risk of re or chemical burn if mistreated. Do not disassemble
or heat above manufacturer’s maximum temperature limit (60°C/140°F) or incinerate. Replace battery with a Vax battery
only. Use of another battery may present a risk of re or explosion. Dispose of used battery promptly. Keep away from
children. Do not disassemble and do not dispose of in re. Do not attempt to disassemble the battery or remove any
component projecting from the battery terminals. The battery and charger have no user serviceable parts. Fire or injury
may result. Prior to disposal, protect exposed terminals with heavy insulating tape to prevent shorting. The battery
must be recycled or disposed of in an environmentally sound manner.
CAUTION: For best performance terminals on battery, battery charger and handheld cleaner must
be clean and free from dust and dirt.
NOTE: The life expectancy of the battery will vary depending on the usage of the handheld cleaner.
If you require a replacement battery contact us - Vax Careline: (AU) 1300 361 505 / (NZ) 0800 800 900.
Charging the battery
Fit the battery onto the battery charger. The battery charger light will turn blue when charging. If a red light appears an error
has occurred, remove the battery and re-t. Once the battery is fully charged the charger light will turn o.
Removing the battery from charger
Press the release button on the battery, hold the base of battery charger and lift the battery to remove.
Getting started with your LithiumLife
TM
battery:
IMPORTANT: The battery will need charging before rst use. Do not attempt to charge non rechargeable batteries.
25% Charged
50% Charged
75% Charged
TIP
The battery can remain on the battery charger once fully charged.
Carrying your handheld vacuum cleaner
Fit the battery onto
the handheld cleaner.
The battery will click
into position when
correctly tted.
Use handle to
carry handheld
vacuum cleaner.
Assembling your handheld vacuum cleaner
CAUTION: Always make sure the pre-motor lter
is correctly tted before using the handheld cleaner.

Related product manuals