Vax W85-PP-T Dual Power Pro

Let’s talk technical
Changing the brushbar (continued)
Line up the ‘right’ side brushes with base and slide
into place. Attach brushbar to side brushes.
Ret belt guard and tighten x2 screws. Ret and tighten screws x2
on either side of side brushes. Ret SpinScrub brushes. Ret rug
guard pins and tighten screws.
Attach the other side of brushbar to side
brushes. Slide onto side of base and into place.
Always unplug the carpet
washer before performing
any maintenance/
troubleshooting checks.
CAUTION
Let’s talk technical