---
Operation
6
Vax Careline: (UK) 0844 412 8455
(ROI) 1-800 928 308
Fill clean water tank
with solution mix.
Pour required dose of
pre-treatment solution
(approx. 40ml per 1L
of water).
Mix solution with warm
water. (max 40˚ C)
Remove clean water
tank.
Unwrap power cord and plug unit in.
Operating your pre-treatment wand (some models only )
NOTE: Pre-treating your carpet before washing will help to remove stubborn stains.
NOTE: Do not over saturate your carpet.
NOTE: Leave pre-treatment solution to work for 10-15 minutes then wash carpets as
described on page 6 of Operation.
IMPORTANT: Before setting the machine up to wash, ensure the clean water tank is
rinsed thoroughly of pre-treatment solution.
Spray evenly onto
desired areas.
To Next Page
Loading...
Need help?
General
