Vaxcel Yosemite - User Manual

Model No.: F0011
ORIGINAL VAXCEL CEILING FAN LIMITED LIFETIME WARRANTY*
*for full limited lifetime warranty details please see final page of these instructions.
Safety Instructions
READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN TO
INSTALL THE FAN AND SAVE INSTRUCTIONS.
•
All set screws of the fan must be checked and retightened where necessary before installation.
•
To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets,
balancing the blades or cleaning the fan. Do not insert foreign objects between rotating fan blades.
•
Before changing the fan direction, turn off the fan and wait for the fan blades to stop completely.
•
The safeguards provided by these safety instructions and by the separate installation instructions
are not meant to cover all possible conditions and situations that may occur. It must be understood
that common sense, caution and care are factors which can not be built into this product.
•
These factors must be supplied by the person(s) installing, caring for and operating the fan.
WARNING
• TO AVOID RISK OF ELECTRIC SHOCK, BE SURE TO SHUT OFF POWER AT THE MAIN
FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS
FIXTURE. TURNING OFF THE ELECTRICAL POWER BY USING THE LIGHT SWITCH
IS NOT SUFFICIENT TO PREVENT ELECTRICAL SHOCK.
•
TO REDUCE THE RISK OF INJURY, INSTALL THE FAN SO THAT THE BLADES ARE
AT LEAST 7 FEET (2.1 METERS) ABOVE THE FLOOR AND AT LEAST 18 INCHES
(0.5 METERS) FROM THE TIP OF THE BLADES TO THE WALL.
•
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, MOUNT
TO OUTLET BOX MARKED "ACCEPTABLE FOR FAN SUPPORT" AND USE MOUNTING
SCREWS PROVIDED WITH THE OUTLET BOX.
•
THE INSTALLATION HAS TO BE IN ACCORDANCE WITH THE NATIONAL ELECTRICAL
CODE, ANSI/NFPA 70-1999 AND LOCAL CODES. IF YOU ARE UNFAMILIAR WITH THE
METHODS OF INSTALLING ELECTRICAL WIRING, SEEK THE SERVICES OF A
QUALIFIED LICENSED ELECTRICIAN.
PAGE: 1 / 10
230518

Summary

Safety Instructions

General Safety Precautions

Essential safety advice for fan installation and use, covering general handling and operation.

Electrical Safety and Installation Warnings

Critical warnings regarding electrical shock, mounting height, and proper electrical code compliance for safe installation.

Step-by-Step Installation Guide

Initial Setup and Bracket Mounting

Instructions for turning off power, mounting the bracket, and attaching safety cable hook.

Downrod and Canopy Assembly

Hanging Fan and Securing Hanger Ball

Guidance on hanging the fan on the bracket and ensuring the hanger ball is properly seated.

Wiring and Remote Control Integration

Remote Control Pairing and Code Setting

Receiver Installation and Wire Connections

Steps for installing the receiver and making correct wire connections for fan and light operation.

Securing Canopy and Blade Brackets

Final Assembly and Operation

Blade Bracket and Switch Box Assembly

Fan Direction and Power On

Remote Control Operation Functions

Troubleshooting Common Issues

Fan Start, Noise, and Wobble Solutions

Remedies for common problems like the fan not starting, unusual noises, or excessive wobbling.

Light Functionality Issues

Dynamic Blade Balancing Kit

Pre-Balancing Blade Check

Using the Balancing Kit for Wobble Reduction

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document provides comprehensive instructions and warranty information for the Vaxcel Ceiling Fan, Model No. F0011. It covers safety guidelines, installation steps, operational features, troubleshooting, and maintenance, ensuring users can safely and effectively install and operate their ceiling fan.

Function Description:

The Vaxcel Ceiling Fan, Model F0011, is designed to provide air circulation and illumination in residential settings. It features a multi-speed fan with reversible blade direction for year-round use (forward for cooling in summer, reverse for circulating warm air in winter). The fan also includes an integrated light kit with four 4W E12 (C) Base B11 Type LED Bulbs, offering ambient lighting. The fan and light functions are controlled by a remote control set, which includes a receiver, transmitter, and battery, allowing for convenient operation from a distance. The remote control features memory function setting, meaning the fan will operate at the last used speed and the light will stay at the last status when power is restored. The fan supports dual mount installation, including sloped ceiling mount up to 23 degrees. A dynamic blade balancing kit is included to address any wobbling issues that may arise during operation.

Important Technical Specifications:

• Model Number: F0011
• Fan Weight: 21.1 lb (9.6 kg)
• Blade Clearance: Minimum 7 feet (2.1 meters) from the floor.
• Wall Clearance: Minimum 18 inches (0.5 meters) from blade tip to wall.
• Mounting: Designed for mounting to an outlet box marked "Acceptable for Fan Support."
• Downrod Length: Includes a 6" downrod.
• Light Kit: Integrated, uses four 4W E12 (C) Base B11 Type LED Bulbs.
• Remote Control: 4-key unit code SUR Switch for pairing transmitter and receiver. Supports multiple fans with different codes to avoid interference.
• Sloped Ceiling Mount: Up to 23 degrees.
• Electrical Requirements: Must be installed in accordance with the National Electrical Code, ANSI/NFPA 70-1999, and local codes. Requires a main fuse or circuit breaker box for power shut-off.
• Dimensions (with 6" Downrod):
  • A: 18"
  • B: 16-1/2"
  • C: 2-1/4"
  • D: 12-1/4"
  • E: 6"
  • F: 56"

Usage Features:

• Remote Control Operation: The fan and light are controlled via a wireless remote.
  • Fan Speed Control: "HI," "MED," "LOW" buttons for high, medium, and low speeds, respectively. "OFF" button to turn the fan off.
  • Light Control: "UP/L" button to quickly turn on/off the light and to adjust illumination (dimmer) by pressing and holding. "DOWN/L" button to quickly turn on/off the light and to adjust illumination (dimmer) by pressing and holding.
  • Memory Function: The remote controller retains the last fan speed and light status when power is turned off and on.
• Reversible Blade Direction: A slide switch on the fan allows users to select between "Forward" (left) for cooling and "Reverse" (right) for circulating warm air. The fan must be turned off and blades stopped completely before changing direction.
• Dual Mount Capability: Can be installed with a standard downrod or on a sloped ceiling (up to 23 degrees).
• Safety Cable Hook: Included for additional security during installation.

Maintenance Features:

• Pre-Installation Checks: Users are instructed to check and retighten all set screws before installation to ensure stability.
• Blade Balancing Kit: A dynamic blade balancing kit is provided to correct wobbling issues. The process involves identifying the wobbling blade, attaching a plastic clip to find the optimal position, and then applying a balancing weight to the blade's centerline.
• Troubleshooting Guide: A detailed guide helps users diagnose and resolve common issues such as the fan not starting, noisy operation, wobbling, or light malfunction. This includes checking electrical connections, screw tightness, blade levels, and light bulbs.
• Bulb Replacement: Instructions are provided for replacing the 4W Type B11 E12 LED Bulbs. This involves opening the inner light plate, removing the old bulb, installing the new one, and securing the light plate.
• Cleaning: The manual advises against bending blade brackets when cleaning the fan and warns against inserting foreign objects between rotating fan blades.
• Warranty: The product comes with an "ORIGINAL VAXCEL CEILING FAN LIMITED LIFETIME WARRANTY" for residential use by the original purchaser.
  • Fan Motor: Lifetime warranty against defects in material or workmanship. Replacement part provided free of charge. Labor to repair defects is covered for one year from the original sale date; after one year, labor costs are the responsibility of the purchaser. If no replacement parts are available, the original purchase price will be refunded.
  • Blades and Accessories (excluding glass globes and light bulbs): One-year warranty against defects in material and workmanship. Repair or replacement free of charge, excluding take down/reinstallation services.
  • Integrated LED Modules: 5-year warranty for functionality.
  • Warranty Voidance: Becomes void if the original purchaser ceases to own the fan, or for defects caused by unauthorized repairs, improper installation, modifications, damage, unreasonable use, or failure to provide necessary maintenance. Excludes extreme acts of nature, unsuitable environmental conditions, improper power supply, power surges/dips, and normal corrosion in coastal locations.
  • Limitations: Does not cover glass globes, light bulbs, or finish on metal parts. Limited to the cost of the product only and does not extend to transportation, installation, or replacement costs.
  • Service: Warranty service can be obtained by contacting info@vaxcel.com or calling 1-800-482-9235.

Vaxcel Yosemite Specifications

General

Brand	Vaxcel
Model	Yosemite
Category	Fan
Language	English