1. Place the base on a flat surface.
•
NOTE: The base is extremely heavy. We recommend two
people removing it from the packaging.
2. Using the tower, connect the upper and lower signal lines.
•
NOTE: We recommend having one person hold the tower
firmly, while the other connects the signal lines.
3. Attach the base and tower together.
•
NOTE: Use care when attaching the pieces, as they can jam
the signal cables, which will result in the machine not working
as intended.
4. Lock the base and tower together tightly with the
appropriate screws (included).
5. Install the handrails to the tower with the appropriate screws
(included).
6. Adjust the horizontal cushion to set the machine steady.
7. Connect the power plug.
8. Turn on the power switch (located on the backside of the
base).
9. Press the START button.
To Next Page
Loading...