1. The pulse indicator light flickers when the machine detects your pulse.
2. The linear vibration time display displays the linear vibration time or displays
the linear and horizontal vibration times combined. The preset time is 0-20 minutes.
3. The linear vibration speed display displays the linear vibration speed, ranging
from L00-L60
•
NOTE: When the display reads “L00”, the horizontal vibration will not work.
4. The mode/program lights will turn on when selected. [see page 07]
4.1. Manual mode
4.2. USB
4.3. Auto Program (P1)
4.4. Auto Program (P2)
4.5. Auto Program (P3)
5. The linear vibration time/speed button will adjust the linear vibration time
when displaying time, or the linear vibration speed when in manual mode.
5.1. (+) will increase linear vibration time/speed
5.2. (–) will decrease linear vibration time/speed
6. The on/off button turns the display on and off.
7. The time button adjusts the vibration time when the machine is not in manual
mode.
8. The program button changes the program mode. Pressing the button cycles
through manual mode and auto program P1-P3, when a USB is not inserted, or
cycles through USB user programs U1-U6, when a USB is inserted.
9. The mode/time change button cycles between displaying mode or time on both
#2 and #14 displays simultaneously.
10. The time/speed buttons adjust the vibration time, when displaying time, or the
vibration speed, when displaying speed.
10.1.(+) will increase vibration time or speed by two
10.2.(–) will decrease vibration time or speed by two
To Next Page
Loading...