Installation for dart board
VDarts H2&H2L Global Online Dartboard
Installation Place Of Dartboard
Dartboard Installation
244cm
Throw Line
Dartboard
keep the center of the dartboard (bull)173cm away from floor
Height
Set the throw line (point where darts are thrown) 244cm from
the surface of the dartboard.
Distance
1. Only use screws for installation on wood surfaces.
2. Use bolts or studs if dartboard is to be installed on a concrete wall.
！
1.prepare four screws
2.Fasten the screw by putting their parts into the holes
3.Make sure the distance is 173cm between the dartboard
centre and the floor.
4.keep screw head 5mm out of the wall.
5.make sure the wooden screws are fastened properly by
shaking them lightly.
Nail Holes
Wall
Dartboard
OK
Vdarts H3L
20
1
18
4
13
6
10
15
2
17
3
19
7
16
8
11
14
9
12
5
VDarts H2L
173cm
6
To Next Page
Loading...