6. Features
◆ Using it for 12V/24V batte, working voltage: DC 9V to 36V;
◆ Ensure the batte terminal are clean, grease and dust car result in inaccurate test result;
◆ Wearing eyes protection when working around batte;
◆ Test it in a well-ventilated area, vehicle exhaust contain toxic carbon monoxide;
◆ Keep hair, hands & clothing as well as tester leads& cords away from moving blades& belts;
◆ Keep the tester out of the reach of children;
Note: For safer and more friendly use, connect the black clip (negative pole) rst, and then
connect the red clip (positive pole);
Please do not shake the clip at will when connecting the positive and negative poles.
◆ Check the insulating layer of the clamps to ensure they are in proper condition without
damage, exposed wires, or disconnections to avoid electric shock;
BT310 12V & 24V Batte Analyzer
3
To Next Page
Loading...