VDIAGTOOL BT310 - Page 7

7.2 BATTERY CAPACITY ( For example, for 12V Batte )
Thistesterdeterminesconditionofthebatteaccordingtotheratedvalue labeledonthebatte.
7.2.1 BeforeTest
The engine and all the other accesso load must be OFF in order to have accurate result.
Turn on the vehicle headlight for 2-3 minutes till the batte voltage back to the normal
values if the batte voltage is just fully charged.
7.2.2 Steps
7.2.2.1 Press to select “BATTERY CAPACITY” and press “ENTER” to continue.
BT310 12V & 24V Batte Analyzer
6
MAIN MENU
1.
2.
3.
4.
5.
BATTERY CAPACITY
CRANKING TEST
CHARGE SYSTEM
LANGUAGE SET
ABOUT
7.2.2.3 Press
page below,and press “ENTER” to contiue.
to select “CCA TYPE” which is displayed on the batte rating label
7.2.2.2 Press to select preferable “BATTERY TYPE” ,press “ENTER” to continue.
MAIN MENU
BATTERY TYPE:
STANDARD LSI
VRLA / GEL / AGM / SLA