VDO CD 4506 - Setup; Volume and Audio Configuration; Radio Tuning and RDS Configuration

13
* Depending on version
SETUP
It is possible to modify many of the set's default settings according to your preferences via 'MENU'.
•Press SAM key to enter Setup Menu.
•Press
or to select one of the options in the menu you want to modify.
•Adjust the Rotary Knob to select the value/setting.
•Press key to exit Setup Menu.
The set automatically leaves this mode after 30 seconds if no key presses are made.
Option Value/Setting Usage
( or ) Rotary Knob
START [3 to 47] - Select the start-up volume when power on.
- After modification of the start-up volume, if the set is switched off
and on within 10 minutes, the start-up volume reverts to the last
used volume setting.
- After modification of the start-up volume, if the set is switched off
and on after more than 10 minutes later, the start-up volume is the
level defined in 'SETUP'.
S-VOL[OFF, 1, 2, 3, 4]Select the SDVC (Speed Dependant Volume Control) compensation
level (only when connected and calibrated, see 'SMART Volume' in
'INSTALLATION' and 'SPECIAL FUNCTIONS').
Level 1 gives a smaller increase while level 4 gives gives a greater
increase with respect to the car's speed.
TAVOL [3 to 47] Select volume level of Traffic Announcement, News bulletins and
Alarm messages.
TA OFFSET [-2, -1, 0, +1, +2] Volume level of TA to normal radio station.
TA FADE[_7_, ..., _1_, 0,
-
1
-
,
-
7
-
]Adjust traffic announcement sound position.
CD [-2, -1, 0, +1, +2] Volume level of CD relative to tuner.
CDC* [-2, -1, 0, +1, +2] Volume level of CDC relative to tuner.
AUX IN* [-2, -1, 0, +1, +2] Volume level of AUX IN relative to tuner.
SILENT [SILENT MUTE1, ...,MUTE3] Select mute level.
BEEP [OFF, 1, 2, 3, 4, 5] Select volume level of confirmation beeps.
RADIO [EUROPE, ASIA, LATIN Select the tuner according to European, American or Asia standards.
AMERICA]
RDS [RDS OFF, RDS ON] Select 'RDS OFF' to switch off RDS feature.
REG [REG ON, REG AUTO, Select 'REG ON' to maintain regional programme,
REG OFF] Select 'REG AUTO' to switch programme when the next signal is
stronger,
Select 'REG OFF' to directly switch to the programme of the next
region.
AF [ON,OFF] Select 'OFF' to prevent the radio from returning to
Altemative Frequencies.