VDO DLD Wide Range II - Technical data and requirements

10
DLD
®
Wide Range II
Dimensions L 30 x W 116 x H 40 mm
Power supply DLD
®
in active mode: 9 V - 32 V
DLD
®
in sleep mode: 6.5 V - 9 V
Current consumption
Active mode: RMS consumption 300 mA at 12 V
Peak consumption: 2 A at 12 V
Sleep mode: 6,5/ 32 mA at 12 V witthout/ with GSM
Temperature range Storage:
Operating:
-25°C to 85°C
-25°C to 70°C
Backup battery None
Protection class IP42 from 5 sides
In-line fuse protection 5 Amp
USB Type 1.1 and 2.0
Requiremets on vehicle side
Digital tachograph DTCO
®
1381 Rel. 1.3 or later
Port on front side or
CAN bus
Activated front side port or CAN bus
(connector C for fi xed mounting) of DTCO
®
(by workshop)
Technical data and requirements