To Next Page

To Previous Page

General safety notes

Warning: Risk of electric shock

All work on the electrical system must only be carried out by

a specialist workshop.

Warning: Danger of short circuits

Bear in mind that during all installation work (especially when

working on the vehicle’s electrical system), the vehicle manu-

facturer’s instructions must be adhered to.

Warning: Before removing the connection terminals from the

battery, observe the following points:

• Switch off all electrical consumers.

• Disconnect the negative battery terminal before the positive

battery terminal.

Warning: Secure all power cables in accordance with the

guidelines.

Warning: Danger of explosion

When loading and unloading hazardous goods onto / from ADR

vehicles and in environments that are at risk of explosion, the

DTCO

1381 front interface must be closed, i.e.

• the DLD

Wide Range II power circuit

must be interrupted via the vehicle's master switch.

• there must be no plug connections to the DTCO

1381 and

no data being downloaded.

Questions and Answers:

Need help?

Do you have a question about the VDO DLD Wide Range II and is the answer not in the manual?

VDO DLD Wide Range II Specifications

General