26.7. In menu the LED Total Width and LED Total Height must be as same as your
actual LED screen, at present the resolution of LED screen is 3840 x 2160;
26.8. In menu the Unit width and Unit height must be as same as the actual LED
screen the unit LVP615 connected;
26.9. After set these parameters of last two steps, press Brt+ or Brt- key to select
setup option E.8 Auto Calculation, press OK to calculate input parameters
automatically (the step only for #1 #2 #3 #4 processor);
26.10. After last step press press Brt+ or Brt- key to enter input parameter setup
menu ( normally for input parameters we only need to set In H_Start and In
V_Start, the step only for #1 #2 #3 #4 processor);
26.11. #1 processor
E. Mosaic ( Video wall App)
--------------------------------------------------------------------
E.1 LED Total Width 3840
E.2 LED Total Height 2160
E.3 Unit Width 1920
E.4 Unit Height 1080
E.5 Unit H_Start 0
E.6 Unit V_Start 0
E.7 Sync. Mosaic Off
E.8 Auto Calculation OK to Apply
E. Mosaic ( Video wall App)
--------------------------------------------------------------------
E.9 In Width 960
E.10 In Height 540
E.11 In H_Start 0
E.12 In V_Start 0
E.13 Ouit Width 1920
E.14 Out Height 1080
E.15 Out H_Start 0
E.16 Out V_Start 0
To Next Page
Loading...
