GB
Safety
• Always keep the dehumidier in vertical position.
• When used in bath/shower rooms, the dehumidier must be placed at least 0,6 m from
the bathtub or shower cabin.
• Leave the unit to stand for one hour before connecting to the mains supply after transport
or when it has been tilted (e.g. during cleaning).
• Allow a free space of 15 cm around the unit.
• Keep all foreign objects away from the air intake and outlet openings.
• Keep the unit away from heaters or other heat-producing equipment.
• Never pour or spray water over the unit.
• The mains supply must conform with the voltage specied on the rating label.
• Never use the plug to start or stop the dehumidier. Always use the switch on the control
panel.
• Before moving the unit, switch it off, pull the plug and empty the water tank.
• Clean the air lter when needed. The dehumidier is most effective when the lter is
clean.
• Don’t use sprays or other ammable cleaners on the product.
• If the dehumidier breaks down, please turn it off and then pull the plug.
• If the supply cord is damaged it must be replaced by an approved and qualied person.
Function
This dehumidier regulates the relative humidity by passing the air through the unit, forcing
the excess moisture to condensate over the cooling element (evaporator). The excess
moisture is turned to water and drained into the water tank. The dried air then passes
through the condenser where it is slightly warmed, and re-enters the room at a somewhat
higher temperature.
Applications
LAF 10 is designed to remove humidity from the air, creating a healthy and comfortable
indoor climate. The dehumidier is suitable for use in basements, cellars, storage rooms,
kitchens, libraries, galleries, computer rooms etc.
Condenser
Evaporator
Water tank
Compressor
Moist
saturated air
Dry
warmer
air
To Next Page
Loading...
