Veatool X15 - User Manual

[PDF] How Do I Turn Off Earbuds X15 Of 2022 - Help Ask
1
How Do I Turn Off Earbuds X15 Of 2022 -
Help Ask
[PDF] Update: 18 Oct 2022.
How do you use Veatool X15 earbuds and charging case "Power Off. Method 1 Put both earbuds into the
charging case and dose the case earbuds will power off automatically. Method 2 (Note: This method just for
eorbuds ore not yet paired with your device. ) Long tap on either earbud for 5s light on earbud will flash red
then earbud power off. ".
How do I turn the sound off on my Bluetooth headphones?
How do I start Bluetooth sound.
How do I use my wireless earbuds?
How to use veatool earbuds Step 1: Put your earphones in the pairing mode. The initial step is to put your
earphones in pairing mode. Step 2: Go to Settings - Bluetooth on your phone. Step 3: Scan for new devices
under the Bluetooth category. Step 4: Select your device and connect. Step 5: Play your favorite music. .
How do I pair my Veatool T16 earbuds?
How do I reset my t16 "'R earbuds alternate flash red-blue light and 12 earbuds flash blue light means1.
TWS pairing done;
Step 2 Activate the Bluetooth setting on your phone search and choose VEATOOL T16 to connect;2.
(There should be voice promptconnected if you wear the earbuds;3.
How do I connect my Veatool earbuds to my phone?
How to use veatool earbuds "Bluetooth Pairing Instructions Connect to device: both earbuds light go
off when connected to device;
Search for bluetooth name VEATOOL MD012 click and connected;
Automatically connect back: After the first connect ion is successful earbuds will connect to the last
paired phone by default;
How do I start Bluetooth sound?
How do earbuds connect to sound.
Do all wireless earbuds work with iPhones?

Summary

How to Use Veatool X15 Earbuds and Charging Case

Powering Off Veatool X15 Earbuds

Describes two methods to power off Veatool X15 earbuds: automatic charging case closure or long-pressing an earbud.

Turning Off Bluetooth Headphones

Using Wireless Earbuds

Veatool Earbuds Pairing and Connection

Steps for pairing Veatool earbuds, including Bluetooth settings and device selection.

Pairing Veatool T16 Earbuds

Resetting Veatool T16 Earbuds

Instructions on how to reset Veatool T16 earbuds, indicated by alternating red-blue lights.

Connecting Veatool Earbuds to Phone

Veatool Earbuds Bluetooth Connection

Guide to connect Veatool earbuds via Bluetooth, including pairing name and auto-reconnect.

Wireless Earbud Compatibility with iPhones

iPhone Bluetooth Functionality

Wireless Earbud iPhone Connectivity

Troubleshooting Earbud Connection Issues

Connecting Earbuds to Android Phone

Addresses common reasons for Bluetooth connection failure on Android devices.

Checking AirPod Charging Status

Left AirPod Not Charging

Resetting X15 Earphones

X15 Earbuds Connection and Reset

Details on connecting X15 earbuds and restoring them to factory settings.

Changing JBL Earbud Language

Pairing and Language Selection for T16 Earbuds

Determining Full Earbud Charge

Earbud Battery Indicator Lights

Resetting Veatool T16 Earbuds

Veatool MD012 Earbud Reset Procedure

Steps to reset Veatool MD012 earbuds by tapping and holding touch buttons.

Earbud Charging Status Indicators

Wireless Earbud Charging Not Initiated

Connecting Earbuds to Android

Connecting Mobile Devices to Bluetooth Sound

Charging Earbuds

Earbud Charging Process

Earbud Battery Draining Quickly

Earbud Charging Recommendations

Veatool X15 Earbuds and Case Usage

Turning Off Veatool X15 Earbuds

Specific instructions on how to turn off the Veatool X15 earbuds.

Resetting Bluetooth Connection

Troubleshooting Bluetooth Connectivity on Android

Steps to reset Bluetooth settings on Android devices to resolve connectivity issues.

Using Earbuds with iPhone

Earbud Functionality on iPhone

Wireless Headphone Pairing Mode

Initiating Wireless Earbud Pairing

Resolving Bluetooth Pairing Problems

iPhone Bluetooth Pairing Fixes

Troubleshooting steps for Bluetooth pairing issues with iPhones.

Phone Not Detecting Bluetooth Earbuds

Android and iOS Bluetooth Device Reset

Instructions for resetting Bluetooth on Android and unpairing on iOS devices.

Pairing E7 Earbuds

Kovon Earbuds Pairing Procedure

Connecting X15 Earbuds

Pairing Veatool E3 Earbuds

Veatool E3 Earbuds Pairing Steps

Instructions for pairing Veatool E3 earbuds by holding buttons and searching for 'X15'.

Troubleshooting Wireless Earbud Charging

Veatool X15 Charging Port Inspection

Charging a Single Earbud

Separate Earbud Charging

Connecting Earbuds to iPhone

iPhone Earbud Connectivity Issues

Pairing Veatool E3 Earbuds

Veatool E3 Earbud Pairing with Phone

Overview

1. Function Description
2. Important Technical Specifications (Inferred and Explicit)
3. Usage Features
4. Maintenance Features

This document provides a comprehensive guide to using and troubleshooting Veatool X15, T16, E3, and MD012 earbuds, as well as general information applicable to various Bluetooth headphones and true wireless earbuds. It covers pairing, charging, resetting, and common issues.

Function Description:

The Veatool X15, T16, E3, and MD012 are true wireless earbuds designed for audio playback and communication via Bluetooth. They are intended for use with smartphones (Android and iPhone), tablets, and other Bluetooth-enabled devices. The earbuds typically come with a charging case that not only protects them but also recharges them on the go.

Important Technical Specifications (Inferred and Explicit):

• Bluetooth Connectivity: All mentioned earbuds utilize Bluetooth for wireless connection to devices. Specific Bluetooth versions are not explicitly stated but are implied to be compatible with modern smartphones.
• Battery Life:
  • Most Bluetooth earbuds can last for about 4-6 hours on a single charge.
  • Bluetooth headsets (potentially including some Veatool models or similar devices) can last 6-12 hours on a single charge.
  • Premium brands might offer 20-22 hours, or even up to 30 hours if features like Active Noise Cancellation (ANC) are switched off.
  • The Veatool earbuds are advertised with "40 Hours Playtime" for some models (e.g., Veatool E3), which likely includes the charging case's capacity.
• Charging:
  • Earbuds are charged by placing them in their charging case.
  • The charging case itself is powered by a lithium-ion battery.
  • Full recharge for earbuds typically takes approximately 2 hours.
  • Charging indicators (red, yellow, green, or white) are present on both earbuds and the charging case to show battery status.
• Waterproof Rating: Some models, like the Falwedi T16, are explicitly mentioned as "Waterproof" (IPX5 rating for the Veatool E3 is also mentioned).
• Controls: Earbuds feature touch sensors for various functions (e.g., touch and hold for 7 or 10 seconds for reset, multifunction button for language selection on JBL T16).
• Microphone: Some models, like the Veatool E3, include a microphone for calls.

Usage Features:

• Power On/Off:
  • Method 1 (Automatic): Place both earbuds into the charging case and close the lid; they will power off automatically.
  • Method 2 (Manual): Long tap on either earbud for 5 seconds; the earbud light will flash red, then power off. (Note: This method is primarily for earbuds not yet paired).
• Pairing (General Steps):
  1. Put earphones in pairing mode (often indicated by a blinking light, sometimes with an audio cue). This usually involves holding down the power button or removing them from the case.
  2. Go to Settings > Bluetooth on your phone.
  3. Scan for new devices.
  4. Select the device name (e.g., "VEATOOL T16," "VEATOOL MD012," "X15," "VEATOOL E3") and connect.
  5. Once connected, both earbuds' lights typically go off.
  6. Automatic Reconnection: After the first successful connection, earbuds will connect to the last paired phone by default.
• Specific Pairing Instructions:
  • Veatool T16: "R" earbud alternates red-blue light, and 12 earbuds flash blue light (TWS pairing done).
  • Veatool E3: Remove both earbuds from the charging case, press and hold both buttons for 3-5 seconds. Search for "X15" (note: this might be a typo and should be "E3" or a generic identifier) on your Bluetooth device. You should only connect to one Bluetooth connection if using both earbuds at once.
  • Kovon Earbuds / General: Press the POWER button to enter pairing mode. Press for two seconds if it's the first device, seven seconds if it's the second.
• Playing Audio: Once connected, play your favorite music or other audio.
• Single Earbud Use: You can separately charge one earbud and continue using the other. However, in stereo mode, you will only hear the sound associated with the active side.
• Language Change (JBL T16 example): Press and hold Volume Up + and Down buttons together for 5 seconds until you hear "Welcome." The language options will repeat; press the multifunction button when you hear English.

Maintenance Features:

• Charging Practices:
  • Always charge your earbuds when not in use for best performance and longevity.
  • Keep earbuds in the charging case as a best practice, as the lithium-ion battery in the case will continue charging them until fully charged.
  • Overcharging is generally prevented by protective boards in the lithium battery, ensuring the voltage does not exceed safe levels.
• Resetting Earbuds:
  • Veatool T16 / General: "R" earbud alternates red-blue light, and 12 earbuds flash blue light (TWS pairing done). This is often the indication of a successful reset or pairing.
  • Veatool MD012: Tap the touch button of the left/right earbud. Double-tap the touch button. After connecting to your phone, tap and hold the touch button for 2 seconds, remove your finger, then tap and hold for 2 seconds again to exit.
  • X15 Earphones: Charge before resetting. Take the right (R) earphone out of the cradle. While the LED (blue) lights, touch and hold the touch sensor (R) for about 7 seconds, then for 10 seconds.
• Resetting Bluetooth (on phone):
  • Android: Go to Settings > Apps. Tap the Sort icon (down arrow with three vertical bars), then Show system apps. Tap OK. Find Bluetooth > Storage > Clear data. Tap OK to confirm.
  • iOS/iPadOS: Unpair all Bluetooth devices (Settings > Bluetooth, tap info icon, choose Forget This Device), then restart your phone or tablet.
• Troubleshooting Connection Issues:
  • "Why won't my earbuds connect?"
    • Ensure devices are in range and in pairing mode.
    • Reset devices or have your phone/tablet "forget" the connection.
    • Check if both devices are on and support Bluetooth.
    • Verify device compatibility.
    • Reboot both devices.
  • "Why is my phone not detecting my Bluetooth earbuds?"
    • For Android: Settings > System > Advanced > Reset Options > Reset Wi-Fi mobile & Bluetooth.
    • For iOS/iPadOS: Unpair all devices, then restart.
  • "Why are my earbuds flashing red?"
    • Usually indicates low battery. An orange light might mean a medium level. Charge the headphones.
  • "Why are my wireless earbuds not charging?"
    • Check the earbuds' battery indicator light.
    • The case can charge without earbuds inserted; with earbuds, both charge simultaneously.
    • Red light: Charging. Green light: Fully charged.
    • Inspect the charging port for looseness or damage (bent connectors, metal).
  • "Why my earbuds battery is draining fast?"
    • Could happen on first use or if unused/uncharged for a while.
    • Always charge when not in use. The battery drains even when stored in the carry case.
• General Recommendations:
  • Keep Wi-Fi and Bluetooth turned on for the best experience on iOS/iPadOS devices.
  • If Airplane Mode is on, ensure Wi-Fi and Bluetooth are manually turned on if desired.

Veatool X15 Specifications

General

Brand	Veatool
Model	X15
Category	Headphone
Language	English