What to do if there is high discharge gas temperature in Veco Air Conditioner compressor 1?
If the discharge temperature of your Veco Air Conditioner system is too high, ensure that enough water is flowing through the condenser.
What to do if Veco CLIMMA CWS DC INVERTER compressor 1 has a start failure?
If the Veco Air Conditioner compressor experiences a start failure, check the sea water flow, especially if the compressor's envelope reaches zone 5 or zone 9.
What to do if my Veco Air Conditioner shows a motor overload error?
If your Veco Air Conditioner's motor is overloaded, turn off the system, wait one minute, and then attempt to restart it and reset the alarm. This is because the current delivered has exceeded the rated motor current beyond the maximum time allowed.
What to do if Veco CLIMMA CWS DC INVERTER compressor 1 shows an envelope alarm?
If the Veco Air Conditioner compressor was working outside of its 'safe' zone, check sea water flow in case or zone 9.
What should I do if my Veco Air Conditioner displays a 'Drive overT' error?
If your Veco Air Conditioner displays a 'Drive overT' error, it means the drive temperature has exceeded the allowed maximum. Check that there is water flow in the cooling plate on the back of the inverter.
What should I check if my Veco Air Conditioner compressor 1 shows Probe S1, S2, S3, S4 alarms?
If there is a problem with one or more probes in your Veco Air Conditioner, check the probes connections.
What to do if Veco CLIMMA CWS DC INVERTER Air Conditioner compressor 1 shows AL93 Power+ offline?
If Inverter is offline in your Veco Air Conditioner, shut off the power supply and check the wiring diagram and connections, then try to restart the system and reset the alarm.
How to troubleshoot AL1 Clock Board Fault compressor 1 on Veco CLIMMA CWS DC INVERTER?
If you are experiencing AL1 Clock Board Fault compressor 1 with your Veco Air Conditioner, check the battery.
What should I do if my Veco CLIMMA CWS DC INVERTER Air Conditioner shows AL2 Clock Board Fault compressor 2?
If you are experiencing AL2 Clock Board Fault compressor 2 with your Veco Air Conditioner, check the battery.
How do I fix AL3 Clock Board Fault compressor 3 on my Veco CLIMMA CWS DC INVERTER?
If you are experiencing AL3 Clock Board Fault compressor 3 with your Veco Air Conditioner, if it's not working change it.
General| Brand | Veco |
|---|---|
| Model | CLIMMA CWS DC INVERTER Series |
| Category | Air Conditioner |
| Language | English |
Provides necessary information for proper installation, operation, and maintenance of the Climma system.
Details the main features of Climma DC chillers, including variable output and eco mode.
Guidelines for safely moving, unpacking, and checking the unit upon delivery.
Lists directives respected by the chillers and outlines general safety precautions.
Details chiller placement, control box installation, and display setup.
Instructions for installing the flow switch and ensuring proper grounding for the unit.
Covers condensate, sea water, and fresh water circuit installations and components.
Specifies requirements for electrical connections and final installation checks.
Details the electrical control box, its display, and button functions for unit control.
Explains operating modes (Summer, Winter, Off) and Climma functions (Auto, Eco).
Covers unit startup, shutdown procedures, and system parameter programming.
Describes how to view warnings/errors and access system status and information.
Outlines frequent basic tasks and semi-annual extended maintenance procedures.
Instructions for adding antifreeze solution to the fresh water circuit in cold climates.
Provides a comprehensive list of warning and alarm codes, their descriptions, and recommended actions.
Provides solutions for common problems like system not starting, pump issues, and cooling/heating errors.
To Next Page
