What to do if there is high discharge gas temperature in Veco Air Conditioner compressor 1?
If the discharge temperature of your Veco Air Conditioner system is too high, ensure that enough water is flowing through the condenser.
What to do if Veco CLIMMA DC 50 Air Conditioner compressor 1 has a start failure?
If the Veco Air Conditioner compressor experiences a start failure, check the sea water flow, especially if the compressor's envelope reaches zone 5 or zone 9.
What to do if my Veco CLIMMA DC 50 shows a motor overload error?
If your Veco Air Conditioner's motor is overloaded, turn off the system, wait one minute, and then attempt to restart it and reset the alarm. This is because the current delivered has exceeded the rated motor current beyond the maximum time allowed.
What to do if Veco Air Conditioner compressor 1 shows an envelope alarm?
If the Veco Air Conditioner compressor was working outside of its 'safe' zone, check sea water flow in case or zone 9.
What should I do if my Veco Air Conditioner displays a 'Drive overT' error?
If your Veco Air Conditioner displays a 'Drive overT' error, it means the drive temperature has exceeded the allowed maximum. Check that there is water flow in the cooling plate on the back of the inverter.
What should I check if my Veco CLIMMA DC 50 compressor 1 shows Probe S1, S2, S3, S4 alarms?
If there is a problem with one or more probes in your Veco Air Conditioner, check the probes connections.
What to do if Veco Air Conditioner compressor 1 shows AL93 Power+ offline?
If Inverter is offline in your Veco Air Conditioner, shut off the power supply and check the wiring diagram and connections, then try to restart the system and reset the alarm.
How to troubleshoot AL1 Clock Board Fault compressor 1 on Veco CLIMMA DC 50 Air Conditioner?
If you are experiencing AL1 Clock Board Fault compressor 1 with your Veco Air Conditioner, check the battery.
What should I do if my Veco CLIMMA DC 50 shows AL2 Clock Board Fault compressor 2?
If you are experiencing AL2 Clock Board Fault compressor 2 with your Veco Air Conditioner, check the battery.
How do I fix AL3 Clock Board Fault compressor 3 on my Veco CLIMMA DC 50?
If you are experiencing AL3 Clock Board Fault compressor 3 with your Veco Air Conditioner, if it's not working change it.
Instructions for safely loading, unloading, and moving the unit or its components.
Basic rules for safe operation and precautions to avoid injury or accidents.
Importance and procedure for properly grounding the Climma DC chiller to prevent corrosion.
Instructions for making electrical connections, including circuit breakers, cables, and power supply.
Essential checks to be performed during the initial field start-up of the system.
Step-by-step guide on how to properly start the unit and navigate initial setup screens.
How the system logs alarms and warnings, and how to access and navigate warning/error logs.
Explanation of probe naming conventions and a detailed list of system warnings and alarms with their causes and actions.
Troubleshooting guide for common problems such as system not starting, pump issues, and cooling/heating failures.
General| Brand | Veco |
|---|---|
| Model | CLIMMA DC 50 |
| Category | Air Conditioner |
| Language | English |
To Next Page
