EasyManuals Logo

Vector MINI FRIDGE COOLER AND WARMER User Manual

Vector MINI FRIDGE COOLER AND WARMER
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
• Rests on vehicle seat or floor for easy access
Extra-long, 7-foot, 12 volt DC power cord with 12 volt DC plug; equipped with
built-in 10-amp fuse to protect the unit and power source
• Durable, weather resistant construction and easy-open and close lid
• Environment-friendly CFC-free polyfoam liner
• Cold/heat transfer to foods via temperature-efficient liner
• Built-in heat dissipation fan with long-life, brushless motor
• HOT/OFF/COOL sliding power switch
• Automatic shut-off to prevent overheating of unit
• Built-in LED “cool” and “hot” indicators
CAUTIONS:
This unit is intended for use with the supplied 12 volt DC power source
(converter) that can provide at least 4 amperes of current. DO NOT attempt to
use with any other power source
NEVER operate unit in an enclosed space. ALWAYS ensure that there
is adequate ventilation and free flow of air around the unit, so that warm air
expelled by the fan is effectively dissipated
When operating the unit in a vehicle or boat cabin, adequate ventilation must
be provided by an air conditioning system or open window. In a car with
windows up, air temperatures can reach 150 degrees F
This unit is intended for portable use only; it is not designed to be
built-in or recessed - this would interfere with the unit’s air dissipation
system, and could cause a fire or other safety hazard
Use only with the supplied power cord. If cord becomes worn or
damaged, discontinue use and call Vector Customer Service
Department for authorized replacement
Never allow the cooler/warmer or AC/DC converter to be immersed in water
or other liquid. This will void the warranty
Make sure the AC/DC converter is connected to 110/120 V AC, 60 Hz power
Do not leave plugged in. Disconnect AC/DC converter when not in use, or
when cooler is turned to the OFF position

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vector MINI FRIDGE COOLER AND WARMER and is the answer not in the manual?

Vector MINI FRIDGE COOLER AND WARMER Specifications

Power IconPower
operating voltage12 volt DC
ac/dc power adapter110/120 volt AC to 12 volt DC at 4 amps
amperage draw3.6 amperes
power cord length7 feet
fuse rating10 amp
Performance IconPerformance
cooling performanceCools to average 40ºF below ambient temperature
warming performanceWarms to 60°F above surrounding air or 120°F maximum
cold/heat transferTemperature-efficient, aluminum-coated liner
Weight and Dimensions IconWeight and Dimensions
inside width5.8 inches
inside depth5.5 inches
inside height9.85 inches
outside width8 inches
outside depth7.25 inches
outside height14 inches
weight5.2 lbs (2.36 Kg)

Related product manuals