1 Introduction How To Use This Manual
1-6
• Mounting kit - one is required per containment sump.
• Secondary piping vacuum monitoring kit - one each is required for product line, vapor recovery line, or
containment sump interstice monitoring - includes mounting hardware, tubing/connections and cables.
• Interstitial sensor kit for steel tank - includes Vac Sensor, mounting hardware, tubing/connections, riser cap, 3-
way valve and cables.
• 4’, 6’, 8’, or 10’ diameter fiberglass tank interstitial sensor kit - includes Vac Sensor, mounting hardware, tubing/
connections, riser cap, relief valve, 3-way valve and cables.
How To Use This Manual
The sections to follow in this manual when installing and setting up the Vac Sensor System depend on the console
being used.
Console
Applicable Sections
TLS-350/350R Sections 1, 2, 3, 4 and Appendix A
TLS450PLUS Sections 1, 2, 5, 6 and Appendix A
To Next Page
Loading...
