Need help?Do you have a question about the Veeder-Root EMR4 and is the answer not in the manual?
General| Product Type | Electronic Meter Register |
|---|---|
| Model | EMR4 |
| Manufacturer | Veeder-Root |
| Display | LCD |
| Power Source | External |
| Environmental Rating | NEMA 4X |
| Communication | RS-485 |
| Operating Temperature | -40°C to +60°C |
| Storage Temperature | -40°C to +85°C |
Illustrates symbols used to denote hazards like explosive, flammable, and electrical risks.
Highlights severe risks associated with system operation near fuel tanks and emphasizes compliance.
Details parameters configurable by the operator outside of W&M seal requirements.
Describes configuration and calibration tasks performed by trained technicians for W&M conformity.
Configuration for setting up price codes and assigning tax/discount codes to them.
Defines and assigns tax/discount codes and allows creation of subtotal lines.
Configures default system modes and initial display screens for deliveries.
Allows configuration of volume or currency presets and batch presets for multiple products.
Configures flow control solenoids for preset deliveries using advance stop settings.
Manages user pass codes and assigns access permissions to specific setup categories.
Configures printer type, font size, and advance settings for ticket printing.
Procedure to access and start configuring C&C Mode settings.
Lists C&C setup options like Language, Display Syntax, and Meter Calibration.
Configures display language, currency, and custom labels for tickets and reports.
Defines and edits printer labels for delivery tickets and shift reports.
Configures decimal symbols, thousands symbols, and display formats for various fields.
Sets temperature units and performs probe calibration for temperature compensation.
Configures fuel source details, meter ID, input type, and product descriptions.
Sets input type, meter direction, and defines product types, names, and compensation factors.
Assigns product types, names, temperature compensation, and calibration numbers.
Details using Coefficient of Expansion for temperature compensation with product defaults.
Provides minimum/maximum densities and explains density ratio calculation for compensation.
Procedure to match EMR4 density values to local standards for temperature compensation.
Enables/disables price changing, delivery timeouts, Tank ID, custom fields, and other delivery features.
Reboots the system, preserves NVRAM, upgrades software, or resets to factory defaults.
Enables or disables the security code feature and resets user codes.
Details specific delivery errors related to encoder pulses, temperature probes, and connections.
Troubleshoots serial communication failures between IB and Display Heads.
Interprets the IB tri-color LED states for system status and error indication.
Provides a guide to understanding LED flash patterns for system diagnostics.
Addresses issues where the printer has pending data or the ticket is too short.
Troubleshoots errors related to setting advance stop volumes for flow control relays.
Addresses errors during meter calibration, including fuel type and value discrepancies.
Troubleshoots issues where display keys do not respond due to electrical interference.
To Next Page
