Veeder-Root EMR4 User Manual

C&C Mode C&C Mode Setup Categories
37
FUEL SOURCE
Figure 37 illustrates Fuel Source setup in C&C Mode. If you are going to make temperature compensated
deliveries, before performing Fuel Source setup, you must select either coefficient (of expansion) or density as the
temperature compensation method in Delivery Options setup (see
Figure 47).
Figure 37. Fuel Source Setup
Meter ID
Figure 38 illustrates Meter ID setup choices.
Figure 38. Meter ID Setup
METER CALIBRTN
CONFIGURE I/O
OEM MESSAGE
DELIVERY OPTIONS
REPORT FORMATS
RESTART
SECURITY CODE
LANGUAGE
DISPLAY SYNTAX
TEMPERATURE
METER ID
INPUT TYPE
PRODUCT DSCRIP
GO TO FIGURE 38
GO TO FIGURE 39
GO TO FIGURE 40
Press ENTER to accept any changes in any column -
and/or continue pressing to return to FUEL SOURCE
+
-
+
-
+
Press the up/down
buttons to cycle
through remaining
C/C Mode categories
FUEL SOURCE
METER ID
Make your changes to
the ID, pressing up/down
arrows to scroll through
the alpha-numeric
selections, and NEXT to
move from one character
of the ID to the next.
GENERIC 123456
RETURN TO
FUEL SOURCE
FIGURE 37

Veeder-Root EMR4 Specifications

General

Brand	Veeder-Root
Model	EMR4
Category	Measuring Instruments
Language	English