Operation of the System Typical Dispensing Examples
62
DISPENSING WITH MULTIPLE DELIVERIES DISABLED
1. In Setup Mode - Delivery options menu Disable Multiple Delivery.
2. In Volume Mode, press START button to initiate delivery (though START button is pressed for longer time
EMR4 will not go in to Multiple Delivery mode).
3. Deliver Product until required Volume level is reached.
4. Press FINISH button to print Volume Ticket.
DISPENSING WITH MULTICALIBRATE 0.25% DIFF DISABLED
The EMR default setting for entering multiple calibration values requires the user to enter values that are within
0.25% of each other. For example the following set of calibration values are acceptable, 99.66, 99.82, 100.08 but
the following will cause an E65 – CALIBRATION ERROR: 100.25, 100.93, 101.57. To turn off the E65 error
code, just DISABLE the Multicalibrate 0.25% Difference feature.
Take the following steps to disable the Multicalibrate 0.25% Difference feature:
1. In Setup Mode - Delivery Options menu select Multicalibrate 0.25% Diff.
2. Press NEXT button, press +/- button and select DISABLE, then press ENTER button.
REDUCING SLIP PRINTER FONT SIZE
1. In Setup Mode Printer Options, Slip Printer set font size to “FONT 7X7”.
2. Take a Test Print to view the reduced font size.
CALIBRATION PAGE PRINT
1. In Setup Mode Printer Options, - PRINT CALIB PAGE, Press NEXT button.
2. Move +/- button to get YES menu, then Press ENTER button to take a print of Calibration values.
SELECT PRODUCT
During a delivery, when more than one product is available, the user must choose one product prior to each
delivery. On the front of the display head, press +/- keys to display the desired product, then press ENTER to
select it.
To Next Page
Loading...
Need help?
General
