Veeley V5 - 11. Potential Errors, Causes and Solutions

24
ENG
11. POTENTIAL ERRORS, CAUSES AND
SOLUTIONS
POSSIBLE FAULTS CAUSE SOLUTION
No power after switching There is no power supply 1. Check whether the battery is
installed.
2. Battery voltage is insufcient,
charge the battery.
The driving range decreases 1. Insufcient battery charge
2. The tire pressure is insuf-
cient
3. Frequent braking, starting
and overloading
4. Battery aging or normal
take-off capacity
5. Low ambient temperature
and thereby reduce
the battery capacity
1. Check that the charger is
damaged
2. Check the tire pressure
before use
3. Develop good driving habits
4. Replace the battery
5. Normal phenomenon
The battery cannot be charged 1. The charger is not connected
2. The battery temperature is
too low
3. The battery is too hot
1. Check that the plug is loose
2. Wait until the battery has
the correct charging tempe-
rature
3. Wait until the battery has
the correct charging tempe-
rature
Display does not turn on 1. There is no power supply
2. The power converter is
damaged
3. The dashboard is defective
1. Check that the battery is
connected;
2. The battery is defective
3. Contact the after-sales ser-
vice to have the fault rectied
4. Check the fuse