7veethree.com/support/templates/
No regular maintenance should be required, except for cleaning the lens as needed, using
a soft, damp cloth. Do not use abrasive materials or solvents.
If you are experiencing operating problems with the display, refer to the following
diagnostics:
3. Maintenance and troubleshooting
Problem
Possible Solution
Unit does not power up
Ensure connections to unit are correct
Ensure power source is present
Unit fails to display any data
Ensure connections to unit are correct
Ensure data source is broadcasting data
Ensure source address in the display
matches source data being provided
by the engine and/or transmission
Ensure the backbone is connected and
terminating resistors are in place
Unit displays random data
Ensure connections to unit are correct
Ensure “demo mode” is off
To Next Page
Loading...
Need help?
General
