Vega SP1180 User Manual

SP1180
863MHz Digital Hybrid Wireless Outdoor Speakers
User’s Manual
P.1
INTRODUCTION
This 863 MHz digital hybrid wireless speaker system uses latest wireless technology
that enables you to enjoy music and TV sound anywhere inside or outside your home.
You can simply connect the system to any audio source such as Radio, TV, VCR,
Hi-Fi and CD/MP3/VCD/DVD player. Without complicated wiring and installation with
your Audio/Video equipments and rear channel amplifier, the system enables you to
enjoy thrilling, lifelike sound in minutes.
FEATURES
1. Weatherproof indoor and outdoor speakers.
2. Automatic Phases Lock Loop (PLL) scanning system on speaker receivers
3. Phase Lock Loop (PLL) transmission system on transmitter
4. 863 MHz Digital Hybrid RF technology speakers system.
5. RF technology lets you roam freely throughout your house, garden.
6. Operating distance up to 100 meters.
7. No line of sight limitation.
8. Virtually interference free audio quality.
9. Auto ON/OFF control.
10. Auto tuning function.
11. Remote control unit.
12. Wall-mountable.
13. 2-way speakers.

Vega SP1180 Specifications

Transmission

transmission mode	UHF
carrier frequency	863 MHz Digital Hybrid

Power

operation voltage (transmitter)	DC 12.5V 150mA
speakers power source	6 X ‘C’ size Alkaline batteries or DC 9V 1.5A adaptor
remote control unit power source	2 X ‘AAA’ size batteries

Audio

frequency response	40Hz – 12KHz
distortion	1%
S/N ratio	65dB (typical)

Performance

operation distance	Up to 100 meters
speakers	2-way
output power	2 x 5 Watts

Summary

Component Identification

Transmitter Components

Identifies the various parts of the transmitter unit, including antenna and indicators.

Speaker Receiver Components

Details the components of the speaker receivers, such as controls and power inputs.

Remote Control Components

Identifies the buttons and features of the remote control unit.

Installation Guide

Transmitter Setup

Instructions for connecting the transmitter to power and audio sources.

Speaker Receiver Setup

Guidance on installing and powering the speaker receivers using batteries or AC adapters.

Operation and Usage

System Operation Steps

Step-by-step instructions for turning on, tuning, and adjusting volume for the system.

Remote Control Usage

Instructions for inserting batteries and operating the remote control unit.

Troubleshooting and Specifications

No Sound Issues

Troubleshooting steps to resolve problems when no sound is produced by the speakers.

Distorted Sound Issues

Troubleshooting steps for resolving audio distortion and interference.

Technical Specifications

Detailed technical specifications of the wireless speaker system.