When changing the measurement, the assistant can be opened any
time. The subsequent steps can be also reached via the classical
menu guidance. The description of the individual menu items is
available in the classical menu guidance. In chapter "Application
examples" you will find further information to the setup.
The main menu is split into six a reas with the following functions:
l Device settings: Includes the device-TAG, settings for network
connection such as date/time setting, …
l Measurement loop: Includes settings for input selection, adjust-
ment, damping, linearization, scaling, outputs, …
l Display: Includes settings to the displayed measured value,
languafe setting und brightness of the background lighting
l Diagnosis Includes information to the device status, error
messages, input current, digital inputs
l Further settings: Includes simulation, reset, PIN, sensor address,
…
l Info: Shows serial number, software version, last change, instru-
ment features, MAC addr., …
à Select the requested menu item via the respective keys and
confirm with [OK].
You can assign an unambiguous name to VEGAMET 391 via the
Device-TAG. This function is recommended when several instruments
are implemented and a good documentation of larger systems is
required.
à Carry out your settings via the respective keys and save with [OK].
For instruments with Ethernet interface, the instrument must be
provided with an IP address/Subnet mask suitable for your network.
Depending on the network, the adjustment of a gateway address is
also necessary. A s an alternative, addressing via DHCP and a host
name is also possible. These specifications are available from your
network administrator. Keep in mind that your settings are only
effective after a restart of VEGAMET 391. Further information to these
network parameters is available in the supplementary instructions
manual "RS232/Ethernet connection" and in the online help of the
corresponding DTMs.
Classical menu gui-
dance/main menu
Device settings - Device-
TAG
Device settings - Host
Name/IP addr.
VEGAMET 391 • 4 … 20 mA/HART signal conditioning instrument 19
6 Setup with the integrated indicating and adjustment unit
36032-EN-091116
To Next Page
Loading...