Need help?Do you have a question about the Vega VEGAMET 841 and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Manufacturer | VEGA |
| Product Name | VEGAMET 841 |
| Output Voltage | 24 V DC |
| Communication Interface | Modbus |
| Temperature Range | -20 ... +60 °C |
| Input signal | 4 ... 20 mA |
| Output signal | 4 ... 20 mA |
| Relay output | 2 x SPDT |
| Protection | IP20 |
| Ambient temperature | -20 to +60 °C |
| Voltage supply | 10.5...36 V DC |
Provides mounting, connection, setup, maintenance, and safety instructions for the instrument.
Manual is for trained personnel; contents must be made available to qualified staff.
Explains symbols used in the document for clarity and safety warnings.
Operations by trained personnel; instrument for 4-20mA/HART sensors; proper use ensures reliability.
Instrument must be flawless; user responsible for safety measures and regulations.
USA/Canada NEC/CEC compliance; Ex area safety.
Details delivery items: controller, mounting plate, screws, glands, info sheets.
Explains function: value display, limit monitoring, pump control.
Identifies physical parts and information on the type label.
Describes on-site adjustment via integrated unit or wireless tools.
Covers proper handling to maintain instrument condition.
Lists optional accessories like sun shade and pipe mounting set.
Suitability for indoor/outdoor, mounting options, environmental conditions.
Methods to prevent moisture ingress and housing pressure equalization.
Specific steps for mounting using the plate.
Process for mounting on pipes using optional accessories.
How to attach optional sun protection for display readability.
Safety, voltage supply, cable, and gland requirements.
Selection between active sensor power supply or passive input.
How to connect terminals and illustration of wiring.
Describes the device's initial self-check after power-on.
Secures Bluetooth access with codes.
Locks device parameters using a code.
Method for synchronizing codes via a myVEGA account.
Using integrated display and keys for adjustment and diagnosis.
How measured values and menu items are shown on screen.
Structure of menus for measurement, indication, functions, and diagnostics.
Adapting the instrument to application conditions via parameter adjustment.
Lists available applications like Level storage, Pumping station, Flow measurement.
Configuring damping and linearisation for value stability.
Setting 0% and 100% reference values for measurement.
Converting values to units and configuring relay functions (overfill, dry run).
Configuring current output and display settings (brightness, contrast).
How to change the device's display language.
Failsafe relay, access protection, reset procedures.
Viewing device status, faults, and sensor information.
Simulating values for testing and accessing device identification.
System requirements and downloading the VEGA Tools app.
Establishing Bluetooth connection and authenticating with an access code.
Adjusting parameters and changing device code using the mobile app.
System requirements and connecting via Bluetooth to a PC.
PC authentication process using Bluetooth access code.
Adjusting parameters using PC software and device code changes.
Configuring level measurement with safety features.
Wizard for setting up level measurement, linearization, scaling.
Configuring these parameters for various functions.
Setting up device for pump station control based on level.
How pump status is shown and initial setup steps.
Managing pumps by elapsed running times.
Details pump control 1 and 2 operation.
Illustrates pump control 2 with relay switching diagram.
Using option for rain retention basins.
Sequenced/alternating operation, forced pump changeover.
Alternating or sequential pump operation based on switching points.
Diagram illustrating pump control 4 function.
Clarification on alternating operation with dry weather pump.
Measuring flow in open channels using backwater levels.
Predefined curves, ISO dimensions, flow formulas for flumes.
Setup guide for this specific flume type.
Defining application type, adjustment, scaling, totalizer.
Routine upkeep and cleaning procedures.
Steps to fix faults and contact support.
How the device monitors for faults and displays messages.
Listing error codes, causes, and fixes.
Handling out-of-spec conditions and performing function checks.
Procedure for updating device software via Bluetooth.
Steps for returning the instrument for repair.
Reverse order of mounting for safe removal.
Proper disposal of the device as recyclable material.
Confirmations for Bluetooth and hazardous area use.
Compliance with EU directives and environmental system certification.
Detailed specifications for the device.
Specifics for these interfaces.
Details on physical aspects, indicators, and operating conditions.
Summary chart of device capabilities.
Comprehensive list of all supported functions.
Physical size of the VEGAMET 841.
Dimensions of accessories.
Dimensions of brackets for pipe mounting.
Legal information about VEGA's intellectual property.
License details for included open-source software.
To Next Page
