Need help?Do you have a question about the Vega VEGAMET 861 and is the answer not in the manual?
General| Brand | Vega |
|---|---|
| Model | VEGAMET 861 |
| Category | Controller |
| Language | English |
Describes the manual's purpose and scope.
Explains symbols and their meanings for safety and notes.
Specifies that only trained and authorized personnel should perform operations.
Provides essential safety guidelines for operating the instrument.
Details specific safety precautions for hazardous area applications.
Explains how the VEGAMET 861 controller functions.
Covers local and wireless adjustment methods for the device.
Lists optional accessories like sun shade and pipe mounting sets.
Provides general guidelines for mounting the VEGAMET 861.
Details specific steps for wall and tube mounting the device.
Outlines safety instructions and requirements before connecting power.
Illustrates the electrical connections for power, outputs, and inputs.
Describes the device's self-check procedure upon initial power-up.
Explains how the Bluetooth interface is secured against unauthorized access.
Details how to protect device settings from unwanted changes using a device code.
Describes the integrated display and adjustment unit's functions and keys.
Explains the different display modes and information shown.
Provides a structured overview of the device's menu system.
Guides through the process of adapting the instrument to application conditions.
Details the steps to connect the device to a smartphone or tablet via Bluetooth.
Explains how to adjust device parameters using the mobile app.
Describes how to establish a connection with a PC/notebook via Bluetooth.
Covers adjusting parameters using PACTware/DTM software.
Details how to configure and set up measured value recording.
Explains how to start and manage data recording processes.
Describes the procedure for saving recorded data to an SD card.
Details level measurement with safety functions for tanks.
Explains the controller's capabilities for pump station automation.
Covers flow rate measurement using flumes and weirs.
Provides guidance on identifying and rectifying common device faults.
Explains how to interpret fault messages and perform diagnostics.
Details the process for updating the device's software.
Provides instructions on how to safely remove the device.
Gives guidance on the proper disposal of the device.
Lists approvals relevant for use in hazardous environments.
Confirms the device's compliance with applicable EU directives.
Presents detailed technical specifications and operating parameters.
Summarizes available applications and functions, and their adjustment options.
Provides detailed physical dimensions of the device and mounting plate.
Details the licenses for open source software used in the device.
To Next Page
