Vega VEGAMET 861 - Setup with smartphone;tablet (Bluetooth); Connecting

31
8 Setup with smartphone/tablet (Bluetooth)
VEGAMET 861 • 4 … 20 mA/HART
58866-EN-200401
8 Setup with smartphone/tablet (Bluetooth)
8.1 Preparations
Make sure that your smartphone/tablet meets the following system
requirements:
•
Operating system: iOS 8 or newer
•
Operating system: Android 4.3 or newer
•
Bluetooth 4.0 LE or newer
Download the VEGA Tools app from the "Apple App Store", "Goog-
le Play Store" or "Baidu Store" to your smartphone or tablet.
8.2 Connecting
Start the VEGA Tools app and select the function "Setup". The smart-
phone/tablet searches automatically for Bluetooth-capable instru-
ments in the area.
The devices found are listed and the search is automatically contin-
ued.
Select the requested instrument in the device list.
The message "Connecting …" is displayed.
Whenestablishingtheconnectionforthersttime,theoperatingtool
andthecontrollermustauthenticateeachother.Aftertherstcorrect
authentication, each subsequent connection is made without a new
authentication query.
For authentication, enter the 6-digit Bluetooth access code in the
nextmenuwindow.Youcanndthecodeontheoutsideofthedevice
housing and on the information sheet "Pins and Codes" in the device
packaging.
Note:
If an incorrect code is entered, the code can only be entered again
after a delay time. This time gets longer after each incorrect entry.
The message "Waiting for authentication" is displayed on the smart-
phone/tablet.
After connection, the adjustment menu is displayed on the respective
adjustment tool.
If the Bluetooth connection is interrupted, e.g. due to a too large
distance between the two devices, this is displayed on the adjustment
tool. The message disappears when the connection is restored.
System requirements
Connecting
Authenticate
Enter Bluetooth access
code
Connected