SD500 Spindle Servo Drive Manual
1
Preface
First of all, we’d like to extend out sincere thanks for purchasing SD500 series
spindle servo drive from Veichi Electric!
SD500 series spindle servo drive is designed with high performance closed-loop
vector control, featuring wide speed range, fast response, accurate positioning, etc. Its
various functions and external extension interfaces, with the upper CNC system, are
enough for spindle orientation, C-axis, rigid tapping, indexing and positioning. The
SD500 series spindle servo drive can be widely used in machining center, CNC
machine tool, CNC milling machine, tilting lathe and flying shear, chasing cut, etc.,
becoming the preferred drive product for various machine tool power axis.
This user manual of SD500 spindle servo drive provides product safety
information, mechanical and electrical installation instructions, basic commissioning,
troubleshooting and daily maintenance-related matters. To ensure correct installation
and operation of the SD500 spindle servo drive and full use of its superior
performance, please read this in detail before installing it. If there are any doubts
about functions and performance, please consult our technical support staff for
assistance.
Due to the continuous improvement of servo products, the information provided
here is subject to change without notice.
To Next Page
Need help?
General
