What to do if Veit 8741 show ERROR 5: MOTOR-CURRENT?
If you're getting an ERROR 5 on your Veit Finishers, which indicates a MOTOR-CURRENT issue, it means no current is flowing to the motor. You should check the motor and its wiring. If those look okay, the servo motor might be defective and require replacement.
What does ERROR 8: SIGNAL MOTOR-BRIDGE mean on Veit 8741 Finishers, and how to fix it?
If your Veit Finishers are displaying ERROR 8, indicating a SIGNAL MOTOR-BRIDGE issue, it means there's no signal from the motor-bridge. Check the motor-bridge itself, along with the motor and its wiring. If necessary, replace the defective servo motor.
What to do if Veit Finishers display ERROR 3: EEPROM SAVE?
If your Veit Finishers show ERROR 3: EEPROM SAVE, it means the system failed to save some values to memory. Try restarting the machine. If the error occurs again, the Controller/Processor may need to be replaced.
What does ERROR 4: EEPROM READ mean on Veit 8741 Finishers and how can I resolve it?
If your Veit Finishers show ERROR 4: EEPROM READ, it means the system failed to read some values from memory. Try restarting the machine. If the error continues, you may need to replace the Controller/Processor.
How to fix ERROR 1: UPPER REED-CONT. MOTOR on Veit 8741 Finishers?
If you see ERROR 1: UPPER REED-CONT. MOTOR on your Veit Finishers, it indicates no signal from the upper reed sensor. Check the distance between the upper reed sensor and the magnet and adjust it if it's too far. If that doesn't work, replace the defective reed or the defective servo motor.
How to troubleshoot ERROR 2: BOTTOM REED-CONT. MOTOR on Veit 8741 Finishers?
If you encounter ERROR 2: BOTTOM REED-CONT. MOTOR on your Veit Finishers, it means there's no signal from the bottom reed sensor. Check the distance between the bottom reed sensor and the magnet, adjusting it if necessary. If the problem persists, replace the defective reed or the defective servo motor.
Why is the blowing air insufficient in my Veit Finishers?
If the blowing air from your Veit Finishers is insufficient, it could be due to a dirty fluff filter or a dirty impeller. Try cleaning both of these components. If the issue persists, the potentiometer or the phase control might be defective and need replacement.
What to do if the waistband and hem tension is insufficient on Veit 8741?
If you find the waistband and hem tension insufficient on your Veit Finishers, it's likely that the air pressure is too low. To resolve this, increase the pressure on the maintenance unit.
Why is there insufficient or no steam coming from my Veit 8741?
If you are experiencing insufficient or no steam from your Veit Finishers, several factors could be the cause. The supply or steam nozzle might be dirty, requiring cleaning or replacement. Alternatively, the steam valve or the timer could be defective, necessitating replacement of the valve or the PC-board, respectively.
What to do if the fan motor does not work on Veit 8741 Finishers?
If the fan motor on your Veit Finishers isn't working, the motor contactor is likely defective and needs to be replaced.
Welcome and overview of the manual's sections.
Crucial safety information for safe operation.
Instructions for setting up the unit on a level surface.
Details on connecting the unit's power cable.
How to connect the steam supply and condensate lines.
Instructions for connecting the compressed air supply.
Steps for initial startup and preparing the machine.
How to adjust the hem tensioning carriage.
Explains the control panel elements and functions.
Controls for the industrial version with menu navigation.
Step-by-step guide for a standard operating procedure.
Information on the optional steam reheater function.
Guide for initial setup, language, and frequency settings.
Steps to check installed dongles and options.
Daily, weekly, and yearly maintenance tasks for the unit.
Instructions for extending connection plates.
Procedures for assembling and removing valves.
Guide to replacing cylinder connections.
Lists common problems and their corresponding remedies.
Specific error codes and steps to resolve them.
Visual identification of spare parts with numbered references.
List of pneumatic spare parts with part numbers.
List of electrical and electronic spare parts.
List of software dongles for industrial versions.
List of spare covers and their part numbers.
List of mechanical spare parts.
List of steam-related spare parts.
Pneumatic diagrams for longitudinal and lateral tensioners.
Electrical circuit diagrams for the machine's components.
To Next Page
General