What to do if the slide does not stop when moving down on Veit Finishers?
If the slide on your Veit Finishers doesn't stop when moving down, the micro switch may be defective. Check the switch and its cable, and replace them if necessary.
Why is the steam too wet from my Veit Finishers?
If the steam from your Veit Finishers is too wet, it could be because the stop valve of the condensate drain is closed. To fix this, open the stop valve.
Why does the toothbelt make noise in Veit 8741?
If the toothbelt on your Veit Finishers is making noise, it's likely due to friction between the tooth belt and the tooth wheel. Applying silicon spray to the tooth belt should resolve this issue.
Welcome and overview of the manual's sections.
Crucial safety information for safe operation.
Instructions for setting up the unit on a level surface.
Details on connecting the unit's power cable.
How to connect the steam supply and condensate lines.
Instructions for connecting the compressed air supply.
Steps for initial startup and preparing the machine.
How to adjust the hem tensioning carriage.
Explains the control panel elements and functions.
Controls for the industrial version with menu navigation.
Step-by-step guide for a standard operating procedure.
Information on the optional steam reheater function.
Guide for initial setup, language, and frequency settings.
Steps to check installed dongles and options.
Daily, weekly, and yearly maintenance tasks for the unit.
Instructions for extending connection plates.
Procedures for assembling and removing valves.
Guide to replacing cylinder connections.
Lists common problems and their corresponding remedies.
Specific error codes and steps to resolve them.
Visual identification of spare parts with numbered references.
List of pneumatic spare parts with part numbers.
List of electrical and electronic spare parts.
List of software dongles for industrial versions.
List of spare covers and their part numbers.
List of mechanical spare parts.
List of steam-related spare parts.
Pneumatic diagrams for longitudinal and lateral tensioners.
Electrical circuit diagrams for the machine's components.
To Next Page
General