Installation of devices (water and electricity connection),
first run operation and maintenance should be carried out by
an authorized technician in accordance with the instructions
given in this manual!
Thank you for choosing the single phase instant water heaters of Veito.
This guide contains all of the required installation and operating instructions
for FLOW and FLOW S electrical instant water heaters.
Installation, first run operation and maintenance of the device should be
carried out by a qualified technician who is responsible for the applicable
standards and mounting arrangements.
Care that will be shown during the installation will ensure a long and trouble
free operating life of your device. If the instructions are not applied correctly,
our company is not responsible for any damage that may occur.
Before the installation and use of the device, please read all of these
instructions carefully and keep in mind for later use. Please keep this
book as a reference to be used in the future.
Package Contents
1. Heater Body
2. Fixing Screws ( 3 screws and 3 dowels )
3. 1/2 " Seals
4. Installation Template
5. Installation Guide
EN
-21-
To Next Page
Loading...
