Cleaning the water inlet filter
The water inlet filter is placed in the the water intake, and not only when its
blockage affects the operation of the device but regularly it should be
checked and cleaned or replaced by a new one.
Shut the water intake for cleaning.
Remove the inlet water connection hose from the blue marked water inlet of
the device. Now you can see the water inlet filter which is in the water intake.
Detach the water inlet filter.
Inlet water filter can be cleaned or replaced with a new one.
While the cleaning process, do not use cutting and drilling tools which may
damage the inlet water filter. An old toothbrush or a similar tool is adviced to
used.
Place the water inlet filter into the cold water connection again.
EN
-35-
To Next Page
Loading...
