68
69
Owner’s Manual
48V
Turn the Throttle Handle (on right handlebar) until
the desired speed is attained, maintain this speed
for a few seconds then press (-) button until you
see a « C » in the LCD panel then you can release
the button the Cruise control is activate. You can
now release the Throttle Handle and the speed will
be maintained.
To deactivate the Cruise Control, simply press
one of the brake levers.
MANUAL MODE WITHOUT
PEDAL-ASSISTANCE OR THROTTLE
When you select the 0 mode from the LCD Panel, the Assistance and the
Throttle will not be active, but you will have access to the Panel informa-
tions, speed, distance, etc.
To turn the electrical power OFF entirely, simply press the -/O on the right
side of the battery.
Note that as soon as you use the brakes, the motor turns off automatically
and the chosen functions are deactivated.
Cruise Control
CRUISE CONTROL
To Next Page
Loading...
Need help?
General
