DCM266 GB7
4. Specifications
Accuracy is specified for a period of one year after calibration and at 18°C
to 28°C (64°F to 82°F) with relative humidity to 80%.
4.1 General
DISPLAY 3 1/2 digit LCD, with automatic polarity
indication
MEASURING dual-slope integration A-D converter
system
OVERRANGE INDICATION "1" figure only in the display
MAXIMUM VOLTAGE BETWEEN
TERMINALS AND EARTH
GROUND
CAT II 600V
OPERATING TEMPERATURE 0°C to 40°C (32°F to 104°F)
STORAGE ENVIRONMENT -10°C to 50°C (14°F to 122°F)
POWER SUPPLY 9V battery
ACCESSORIES operating manual, set of test leads
LOW BATTERY INDICATION " BAT " appears on the display
SIZE (H x W x L) 37 x 90 x 230 mm (1.46" x 3.54" x
9.06")
WEIGHT approx. 320g (including battery)
4.2 AC current
Range Resolution Accuracy Note
200A 100mA ±2.0% of rdg ± 5 digits
600A 1A ±2.0% of rdg ± 5 digits
Frequency Range : 50Hz to 60Hz
Response : Average, Calibrated in rms of sine wave
Overload protection : 1200A within 60 seconds. Jaw opening : 2" (5cm)
To Next Page
Loading...
