Velleman DVM832 - 9. Specifications; 9.1 DC VOLTAGE; 9.2 AC VOLTAGE

DVM832
V. 02 – 04/03/2016 7 ©Velleman nv
Pollution
degree 2
Only nonconductive pollution occurs. Occasionally,
temporary conductivity caused by condensation is to be
expected.(home and office environments fall under this
category)
 This device is only suitable for measurements in Pollution
degree class 2 environments.
 operating environment:
o temperature: 0 °C to 40 °C (32 to 104 °F)
o humidity: < 80 % RH.
 storage environment:
o temperature: -20 °C to 60 °C (-4 °F to 140 °F)
o humidity: < 90 % RH
9. Specifications
 overrange: yes
9.1 DC VOLTAGE
Do not measure circuits that may contain voltages
> 500 V
range
resolution
accuracy
200 mV
0.1 mV
± (1.0 % rdg + 2 digits)
2000 mV
1 mV
20 V
10 mV
200 V
100 mV
500 V
1 V
± (1.2 % rdg + 2 digits)
Overload protection: 500 V DC or AC rms
Impedance: 1M Ω
9.2 AC VOLTAGE
Do not measure circuits that may contain voltages
> 500 V
range
resolution
accuracy
200 V
100 mV
± (1.2 % rdg + 3 digits)
500 V
1 V
Average sensing, calibrated to rms of sine wave
Frequency range: 40-500 Hz
Overload protection: 500 V DC or AC rms
Impedance: 450k Ω