7
USE
Use
Insert the batteries in the battery compart-
ment as indicated in figure and close the
compartment.
Remark : Respect your national
and local laws when disposing of
empty batteries.
When the batteries are inserted for the first time :
Channels 1..8 are configured as 'toggle' and are accessable by pressing button 1..8.
The indicator led will briefly light when a button is pressed.
Briefly pressing the shift button turns off all relays.
8 Addresses are available. Address 1 is the default address.
When the batteries are replaced :
The unit will remember its address and the 'toggle'/'momentary' setting for each channel.
To Next Page
Loading...
