21
DELAY: Timed Delay
DELAY allows you to set a
timed delay before triggering
a single exposure or sequence
of exposures. You can
select a timed delay from
0 second to 99 hours 59
minutes and 59.9 seconds.
1. Press the / arrows to
position the cursor beneath
DELAY.
2. Press the Set button to
change the delayed timer
settings. The time increments
will blink.
3. Use the / arrows to
move between hours,
minutes, seconds, and tenths
of a second.
4. Use the / arrows to
change the time increments.
5. Press Set to confirm.
6. Press the button to begin
the timer.