Vello WIRELESS SHUTTRBOSS 4.0 User Manual

24
N: Shot Count
N is the number of exposures
selected for the sequence.
You can trigger the camera’s
shutter from 1 to 199 times
or infinite (--). By default,
there is a 1-second delay
between exposures until you
set the interval manually.
1. Press the / arrows
to position the cursor
beneath N.
2. Press the Set button to
change the shot-count setting.
The shot-count increment
will blink.
3. Use the / arrows to
change the shot-count
increments. To set the shot
count to infinite, press the
/ arrows until - - is
displayed.
4. Press Set to confirm.
5. Press the button to begin
the timer.

Vello WIRELESS SHUTTRBOSS 4.0 Specifications

General

Self-Timer Delay	0 sec. to 99 hr. 59 min. 59.9 sec.
Exposure Time	1 sec. to 99 hr. 59 min. 59.9 sec.
Interval Time	1 sec. to 99 hr. 59 min. 59.9 sec.
Number of Shots	1 to 199, infniite
Wireless Range	196 ft. (60 m)
Power Source	Transmitter: 2 × AAA batteries (not included) Receiver: 2 × AAA batteries (not included)
Standby Time	48 hr.
Operating Temperature	14°F to 113°F (−10°C to 45°C)
Storage Temperature	14°F to 140°F (−10°C to 60°C)
Dimensions (H × W × D)	Transmitter: 5.1 × 1.8 × 0.8 in. (130 × 46 × 21 mm) Receiver: 3.3 × 1.5 × 1.2 in. (85 × 37 × 31 mm)

Weight and Dimensions

Weight	Transmitter: 2 oz. (56.5 g) without batteries Receiver: 1.4 oz. (40 g) without batteries