Preset Screen
The Preset screen allows you to view and modify the volume, low pass crossover frequency and slope, subsonic filter frequency and slope,
p
hase, and polarity of the presets including the Setup, or global, preset. The Preset screen also allows you to modify the contour frequency
and level, and servo gain for each preset. This screen also allows you to set the Night mode percentage and the auto-on setting.
Figure 2: The Preset Screen
• Screen Navigation:
- Previous: Allows you to return to the Frequency Response and Parameters screen.
Establishing Communication between the Digital Drive
PLUS
Subwoofer and the
Digital Drive
PLUS
Windows Setup Program
1)
Start the Velodyne Digital Drive
PLUS
Windows Setup Program using either the desktop shortcut icon or selecting it from the
Windows Program menu.
[ 13 ]
D
igital Drive
P
LUS
U
ser Interface Manual
WINDOWS INTERFACE FOR OPTIMIZATION
To Next Page
Loading...
Need help?
General