Need help?Do you have a question about the Velodyne MiniVee and is the answer not in the manual?
Discusses optimal subwoofer placement in a listening room to maximize output and low frequency extension.
Connects subwoofer via LFE Out from a receiver for typical 5.1 system integration.
Connects via pre-amp main outputs to subwoofer, then to amplifier inputs for bi-amplification.
Connects subwoofer directly to receiver/amplifier speaker outputs when line-level outputs are unavailable.
Discusses optimal subwoofer placement in a listening room to maximize output and low frequency extension.
Connects subwoofer via LFE Out from a receiver for typical 5.1 system integration.
Connects via pre-amp main outputs to subwoofer, then to amplifier inputs for bi-amplification.
Connects subwoofer directly to receiver/amplifier speaker outputs when line-level outputs are unavailable.
General| Driver Size | 8 inches |
|---|---|
| Type | Powered Subwoofer |
| Enclosure Type | Sealed |
| Inputs | Line-level, Speaker-level |
| Finish | Black Ash |
To Next Page
