Need help?Do you have a question about the Velodyne EQ-Max Series and is the answer not in the manual?
General| Enclosure Type | Bass Reflex |
|---|---|
| Auto On/Off | Yes |
| Driver Size | 12 inch |
| Inputs | Line-Level |
| Outputs | Line-Level |
| Phase | 0 or 180 degrees |
Lists key features of the EQ-Max subwoofer, including DSP control, EQ, presets, and amplifier power.
Guides users on optimal subwoofer positioning within a room for best acoustic performance and low-frequency extension.
Explains how to balance subwoofer output with main speakers for optimal system sound.
Details the adjustable low-pass crossover for seamless transition between subwoofer and main speakers.
Describes how to adjust subwoofer phase to correct for cancellation with main speakers.
Describes the IR sensor window that receives signals from the remote control.
Explains the LED display for volume, phase, and Auto-EQ status.
Details the connector for the microphone used in the Auto-EQ process.
Connects to amplifier/receiver speaker outputs for input signal.
Sends a crossed-over speaker-level signal to front speakers.
Allows connection of third-party infrared remote sensors.
Connects to preamp outputs or LFE outputs for signal input.
Selects between standby mode and always-on operation.
Balances subwoofer output with main speakers.
Adjusts the frequency cutoff for the subwoofer's signal.
Explains the adjustable low-pass crossover for seamless transition with main speakers.
Describes the "Subwoofer Direct" setting on the crossover knob, allowing frequencies up to 135 Hz.
Discusses using receiver/processor subwoofer outputs and potential crossover interactions.
Details the functions of the EQ-MAX remote control, including Power, Mute, EQ, and Phase buttons.
Explains how to restore factory default settings using preset sequences on the remote.
Provides crucial warnings against placing objects, liquids, or heat sources on or near the subwoofer.
Instructions on how to safely clean the subwoofer cabinet using a damp cloth.
Advises users not to service the unit themselves and to use qualified technicians for repairs.
Offers solutions for low bass output, including volume adjustments and placement.
Addresses issues with distorted or intermittent output, suggesting volume reduction or power cycling.
Advises saving original packaging for future shipping or moving needs.
Explains the subwoofer's protection circuits against overdriving and overheating.
Provides information on proper recycling of the subwoofer and electronic components, along with legal notices.
Lists Velodyne as a trademark and other trademarks belonging to their respective owners.
To Next Page
