2) Scroll down to the “Velodyne Digital Drive
PLUS
Setup version X.XX” line and double-click it.
3) In the Velodyne Digital Drive
P
LUS
Setup Uninstall dialog window, click Yes.
4) When the Windows uninstall wizard has finished, the Velodyne Digital Drive
PLUS
Windows Setup Program has been completely
removed from your computer.
UNINSTALLING THE VIRTUAL COM PORT SOFTWARE
You can leave the Virtual COM Port driver on your computer after you finish setting up your Digital Drive
PLUS
subwoofer. If you leave the Virtual
COM Port driver on your computer, you can more easily use the Windows Setup Software later to make changes to the Digital Drive
PLUS
subwoofer parameters. You can leave it on even if you decide to uninstall the Digital Drive
PLUS
Windows Setup Program as it will give your
computer the ability to work with more USB devices that require a virtual COM driver.
However, if you need the hard drive space for other programs or files, you can uninstall the Virtual COM Port Software. If you uninstall the
V
irtual COM Port software and want to modify Digital Drive
PLUS
subwoofer parameters, you need to re-install the V
irtual COM Port software.
Because port drivers go into the Windows Device Manager
, not the Windows Program folder, the USB Virtual COM Port driver is uninstalled
in a different way than the Velodyne Digital Drive
PLUS
Windows Setup Program.
[ 19 ]
D
igital Drive
P
LUS
U
ser Interface Manual
WINDOWS INTERFACE FOR OPTIMIZATION
To Next Page
Loading...
Need help?
General