Velux MSL User Manual

MSL
Solar cell awning blind
Solarzellen-Markise
Store extérieur solaire
Solcellemarkise
Buitenzonwering op zonne-energie
Tenda esterna ad energia solare
Toldillo exterior por célula solar
Read instructions in full before commencing installation.
Bitte lesen Sie vor Montagebeginn die gesamte Anleitung sorgfältig durch!
Lire attentivement la totalité de la notice avant l’installation.
Læs hele vejledningen grundigt før montering.
Lees de instructies aandachtig door voordat u begint met de montage.
Leggere attentamente le istruzioni prima di iniziare l’installazione.
Lea estas instrucciones cuidadosamente antes de comenzar.

Velux MSL Specifications

General

Brand	Velux
Model	MSL
Category	Window Blinds
Language	English

Summary

Product Preparation

Determine Window Size

Identify the correct window size using the data plate to select appropriate instructions.

Installation Steps

Programming Remote Control

Configure the remote control for the awning blind by setting switches and pressing buttons.

Removing and Preparing Covers

Temporarily remove covers and screws, and prepare for installation.

Mounting Top Brackets

Securely fix the top mounting brackets to the window frame using screws.

Adjusting Cover Screws

Loosen top cover screws, fit window covers, and retighten.

Handling Installation Covers

Remove and turn over specific installation covers as indicated.

Installing Distance Sheets

Attach distance sheets to the appropriate bracket locations on the window.

Drilling for Cover Attachment

Refit covers and drill holes through them using a 3 mm drill bit.

Applying Sealant and Brackets

Apply sealant to screw holes and attach bottom brackets for stability.

Positioning and Locking Awning

Place the awning blind correctly and secure its locking mechanism fully.

Managing Transit Channels (Right)

Disengage the right transit channel and hold it parallel to the frame.

Securing Side Channels

Pull down and slide side channels into the top cover, ensuring proper fit.

Managing Transit Channels (Left)

Disengage the left transit channel and hold it parallel to the frame.

Removing Transport Fixings

Remove and discard all transit straps and supporting devices.

Determining Top Cover Height

Measure top cover height to select the correct installation illustration.

Important Information

Declaration of Conformity