Vemer memo AST Series - Menu Description

English
- 11 -
User manual memo AST NFC
MENU DESCRIPTION
“Hour counter” menu allows you to check the operation hours
(relay on) of the loads connected to the relays.
“Reset” menu allows you to reset settings, programmed
settings, operating hour counter.
“Ver FW” menu allows you to check the firmware version
installed on the device.
“Settings” menu allows you to change: language, date, time, daylight saving time (DST),
astronomical coordinates, minimum and maximum duration of the interval between two
switchings with random program, PIN for keyboard lock.
“Programming” menu allows you to set a new program or to check,
to copy, to modify or to delete a set program.
“NFC” menu allows you to configure the NFC
communication interface.
C2
C2
C1
C2
C1
C2
C1
C2
C1
C1