- 8 -
User manual memo AST NFC
START PAGE (or main)
Information messages
- day of the week
- product identification code and serial number
- battery status (only if discharged)
-
NO SUPPLy
*
•
Press the key
to access the menu of memo
to change channel 1 and channel 2 status (only for
memo AST2)
to display the calculated sunrise and sunset times**
* Only if memo is not powered by mains.
In this condition the backlighting is not active and the relay is in off
status.
** The displayed times take into account possible entered values of
correction (see page 18).
If the display shows
means that the calculated sunrise
time is after the sunset time.
If the display shows
means that the calculated sunrise
time is before 00:00 or that the calculated sunset is at 23:59.
NOTE: the NFC interface is
active only when the memo
displays the initial (main) page.
The action range of the NFC
interface is deliberately limited:
in order for the memo and the
smartphone to communicate, it
is necessary to place the latter
on the memo display.
information messages
date
relay 2 status
hour
day of the week
relay 1 status