Vemer Memo Series User Manual

English
- 8 -
User manual memo NFC
START PAGE (or main)
Information messages
- day of the week
- product identification code and serial number
- battery status (only if discharged)
-
NO SUPPLy
*
• Press the key
to access the menu of memo
C1
and
C2
to change channel 1 and channel 2 status (only for
memo DW2, memo Y2)
* Only if memo is not powered by mains.
In this condition the backlighting is not active and the relay is in off
status.
NOTE: the NFC interface is
active only when the memo
displays the initial (main) page.
The action range of the NFC
interface is deliberately limited:
in order for the memo and the
smartphone to communicate, it
is necessary to place the latter
on the memo display.
information messages
date
relay 2 status
hour
day of the week
relay 1 status

Vemer Memo Series Specifications

General

Mounting	DIN Rail
Type	Digital Timer
Storage temperature	-20°C to +60°C
Protection degree	IP20
Power Supply	230V AC 50-60Hz
Programming	Weekly
Display	LCD
Output	Relay
Switching Capacity	16A
Supply voltage	230V AC
Output relay	16A
Time range	1 minute to 7 days