English
- 40 -
User manual memo NFC
HOUR COUNTER MENU
“Hour counter” menu allows you to display the hours of use (relay on) of connected loads.
The maximum value of the counter is 99999 hours (about 11 years); reached the maximum limit, the counter resets automatically.
To reset a counter:
1. select the desired channel (only for memo DW2 and memo Y2)
2. press the key
for 3 seconds until the display shows “ ”
3. confirm by pressing
(press to exit without zeroing)
Note: it’s possible to reset all counters contemporary from the “Reset” menu (see page 42).
To Next Page
Loading...
