English
- 46 -
User manual memo NFC
REFERENCE STANDARDS
Compliance with Community Directives:
2014/35/EU (LVD)
2014/30/EU (EMCD)
is declared in reference to the harmonized Standards
• EN 60730-2-7
BATTERY MANAGEMENT
When the battery is close to empty, on the first line of the display
appears
. In this case, the battery must be replaced as
soon as possible. Use only batteries of CR2032.
To replace the battery:
- disconnect the mains
- remove the battery slot cover, turning it anti-clockwise
- replace the battery and remount the cover, turning it clockwise
- connect the power supply
Warning: do not use metal objects (such as screwdrivers) to
remove the battery because this may cause the power reserve to
be canceled, resulting in a loss of date and time.
Warning: in order not to lose date and hour set, it is necessary to
ensure that the time for the battery replacement doesn’t exceed
60 seconds (in absence of power by means).
Dispose of the used batteries observing the laws in force
in relation to the disposal of hazardous waste.
To Next Page
Loading...
